D-Link X-STACK DES-3200 SERIES Reference Manual page 403

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
22 Disabled
23 Disabled
24 Disabled
25 Disabled
26 Disabled
27 Disabled
28 Disabled
DES-3200-28P:admin#
43-4 debug stp show counter
Description
This command is used to display the STP counters.
Format
debug stp show counter {ports [<portlist> | all]}
Parameters
ports - (Optional) Specify the STP ports for display.
<portlist> - Enter the list of port used for this configuration here.
all - Display all port's counters.
If no parameter is specified, display the global counters.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the STP counters for port 9:
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
399