Config Mac_Based_Access_Control Method [Local | Radius] - D-Link X-STACK DES-3200 SERIES Reference Manual

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
Parameters
password - In RADIUS mode, the Switch will communicate with the RADIUS server using this
password. The maximum length of the key is 16.
<password> - Enter the password used here. The default password is "default".
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the MAC-based Access Control password:
DES-3200-28P:admin#config mac_based_access_control password switch
Command: config mac_based_access_control password switch
Success.
DES-3200-28P:admin#
40-4 config mac_based_access_control method
Description
This command is used to configure the MAC-based Access Control authentication method.
Format

config mac_based_access_control method [local | radius]

Parameters
local - Specify to authenticate via the local database.
radius - Specify to authenticate via a RADIUS server.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the MAC-based Access Control authentication method as local:
DES-3200-28P:admin#config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
DES-3200-28P:admin#
376