D-Link X-STACK DES-3200 SERIES Reference Manual page 404

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
DES-3200-28P:admin#debug stp show counter ports 9
Command: debug stp show counter ports 9
STP Counters
--------------------------------------
Port 9 :
Receive:
Total STP Packets
Configuration BPDU
TCN BPDU
RSTP TC-Flag
RST BPDU
Discard:
Total Discarded BPDU
Global STP Disabled
Port STP Disabled
Invalid packet Format
Invalid Protocol
Configuration BPDU Length : 0
TCN BPDU Length
RST BPDU Length
Invalid Type
Invalid Timers
CTRL+C ESC q Quit
43-5 debug stp clear counter
Description
This command is used to clear the STP counters.
Format
debug stp clear counter {ports[<portlist> | all]}
Parameters
ports – (Optional)Specify the port range.
<portlist> - Enter the list of port used for this configuration here.
all - Clears all port counters.
Restrictions
Only Administrator-level users can issue this command.
Example
To clear all STP counters on the Switch:
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
SPACE n Next Page p
400
Transmit:
Total STP Packets
Configuration BPDU : 0
TCN BPDU
RSTP TC-Flag
RST BPDU
Previous Page r Refresh
: 0
: 0
: 0
: 0