Show Snmp View - D-Link X-STACK DES-3200 SERIES Reference Manual

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide

63-12 show snmp view

Description
This command is used to display the SNMP view record.
Format
show snmp view {<view_name 32>}
Parameters
view - (Optional) View name of the user who likes to show.
<view_name 32> - Enter the view name here. The name can be up to 32 characters long.
Restrictions
None.
Example
To show SNMP view:
DES-3200-28P:admin#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
---------------------
view123
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 9
DES-3200-28P:admin#
63-13 create snmp host
Description
This command is used to create a recipient of an SNMP trap operation.
Format
create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv] ]
<auth_string32>
Subtree
------------------------
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
542
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Excluded
Included