Replacing A Monitoring Module; Replacing A Rectifier - Huawei NetCol5000-C User Manual

NetCol5000-C Chilled Water-Cooled In-Row Precision
Air Conditioner
User Manual

6.5.10 Replacing a Monitoring Module

Prerequisites


Context
Preparation: maintain from the rear door.
Procedure
Step 1 Remove the rear door and air filters.
Step 2 Remove cables from the monitoring module front panel.
Step 3 Remove the monitoring module from the power distribution subrack, as shown in
Step 4 Replace the monitoring module, insert the new monitoring module to the corresponding slot
of the power distribution subrack, and connect cables to the monitoring module.
Step 5 Install the air filters and rear door.
Figure 6-10 Replacing the monitoring module
----End

6.5.11 Replacing a Rectifier

Prerequisites

Issue 02 (2013-12-10)
The monitoring module needs to be replaced.
A spare and functional monitoring module is available.
The rectifier needs to be replaced.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
Figure 6-10.
125