Screen Calibration - Huawei NetCol5000-C User Manual

NetCol5000-C Chilled Water-Cooled In-Row Precision
Air Conditioner
User Manual
respectively, calculate as follows: Required return-air temperature = T + 5 ° C; Required
return-air humidity = H + 3%.
Tap Maint > Sensor Adjust on the home screen to enter the sensor adjust screen, as shown in
Figure
Figure 5-52 Sensor adjust screen

5.13.5 Screen Calibration

You can calibrate the screen by tapping the screen on the Screen Calib page or by DIP
switch.
Tapping the Screen on the Screen Calib Page
Prerequisite: The program of the display board works normally; the deviation between the
touching point and the responding point is small; the Screen Calib page can be entered over
the screen.
Tap Maint > Screen Calib to enter the following screen, as shown in
5-53
Issue 02 (2013-12-10)
5-52.
If you need to adjust the sensor, log in as the Engineer user or other types of users that have higher
permission.
is displayed when the screen calibration is complete.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Controller Operate Guide
Figure 5-53. Figure
90