NetCol5000-C Chilled Water-Cooled In-Row Precision
Air Conditioner
User Manual
Figure 3-23 Electrical ports
1. Port for the humidity and
temperature sensor
4. Voltage jumper port
7. Power input port X100
3.13.3 Connecting Power Cables
Remove the transparent plastic cover of the terminal block, connect the cord end terminals to
the power cables, and connect two power cables to the 4PIN terminal, as shown in
3-24, route power cables from the bottom as shown in
cover.
Issue 02 (2013-12-10)
Single power supply: X200 is the power input port.
Dual power supply: The primary power supply connects to the X100 port, and the secondary power
supply connects to the X200 port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. Controller port
5. Ground PE port
8. Outside water
sensor port
Figure
3 Installation Guide
3. J73 group control
communications port
6. Power input port X200
Figure
3-25. Then cover the plastic
41