Reducing Burn-In Of The Screen - NEC PlasmaSync 50XM3 Model Information

Reducing burn-in of the screen

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce burn-in of the screen.
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the and buttons to select "LONG LIFE", then
press the MENU/ENTER button.
The "LONG LIFE" screen appears.
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL. ADJ.
3. Set the LONG LIFE mode using
See page E-29 to set PLE.
See page E-29 to set ORBITER.
See page E-30 to set INVERSE.
See page E-31 to set SCREEN WIPER.
See page E-32 to set SOFT FOCUS.
Information
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
PLE (Peak Luminance Enhancement)
Use this to activate the brightness limiter.
Example: Setting "PLE" to "LOCK1"
Perform Steps 1-2 of LONG LIFE, then...
3. Use the and buttons to select "PLE".
4. Use the and buttons to select "LOCK1".
The mode switches as follows each time the
button is pressed:
→AUTO ↔ LOCK1 ↔ LOCK2 ↔ LOCK3←
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL. ADJ.
: AUTO
: OFF
: OFF
: OFF
: OFF
EXIT
RETURN
and buttons.
or
: LOCK1
: OFF
: OFF
: OFF
: OFF
EXIT
RETURN
E-29
3-152
Information
PLE settings
AUTO .............. The brightness of the screen is
adjusted automatically to suit the
picture quality.
LOCK1, 2, 3 .... Sets maximum brightness.
The brightness level decreases in the
order of LOCK 1, 2, 3. LOCK 3
provides minimum brightness.
ORBITER
Use this to set the picture shift.
Example: Setting "ORBITER" to "AUTO1"
Perform Steps 1-2 of LONG LIFE, then...
3. Use the and buttons to select "ORBITER".
4. Use the and buttons to select "AUTO1".
The mode switches as follows each time the
button is pressed:
→OFF ↔ AUTO1 ↔ AUTO2 ↔ MANUAL←
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL. ADJ.
Information
ORBITER settings
OFF .............. Orbiter mode does not function.
This is the default setting when RGB is
input.
AUTO1 ......... The picture moves around the screen
intermittently, making the picture
smaller. This is the default setting when
a Video or a DVD/HD/DTV singnal is
input. Set to "OFF" when these signals
are not used.
AUTO2 ......... The picture moves around the screen
intermittently, making the picture
bigger.
MANUAL ...... User can adjust the orbiter function
(Horizontal Dot, Vertical Line and
Time) manually.
See the following explanation.
* When a Video or a DVD/HD/DTV singnal is input, the
AUTO1 and 2 functions will affect only the moving
picture and will not make the screen smaller or bigger.
CONFIDENTIAL
or
: AUTO
: AUTO1
: OFF
: OFF
: OFF
EXIT
RETURN