NEC PlasmaSync 50XM3 Model Information page 93

Adjust the ORBITER function manually
Set the amount of shift and the time between movement.
Example: Setting so that the picture moves 2 dots
horizontally and 3 lines vertically every 3 minutes.
Perform Steps 1-3 of ORBITER, then...
4. Use the and buttons to select "MANUAL", then
press the MENU/ENTER button.
THE "ORBITER" screen appears.
5. Adjust the items using the
The mode switches as follows each time the
button is pressed:
• H-DOT
→1 DOT ↔ 2 DOT ↔ ..... ↔ 19 DOT ↔ 20 DOT←
• V-LINE
→1 LINE ↔ 2 LINE ↔ ..... ↔ 19 LINE ↔ 20 LINE←
• TIME
→1 M ↔ 2 M ↔ 3 M ↔ 4 M ↔ 5 M←
ORBITER
H-DOT
V-LINE
TIME
SEL. ADJ.
Information
ORBITER Function settings
H-DOT .......... Moves from 1 to 20 dots in the
horizontal direction.
V-LINE .......... Moves from 1 to 20 lines in the vertical
direction.
TIME ............ Interval of 1~5 minutes (1 horizontal
dot or 1 vertical line per interval).
INVERSE
Use this to set the inverse mode or to display a white
screen.
Example: Setting "INVERSE" to "WHITE"
Perform Steps 1-2 of LONG LIFE, then...
3. Use the and buttons to select "INVERSE".
4. Use the and buttons to select "WHITE".
The mode switches as follows each time the
button is pressed:
→OFF ↔ ON ↔ WHITE←
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL. ADJ.
and buttons.
or
: 2 DOT
: 4 LINE
: 3 M
EXIT RETURN
or
: AUTO
: OFF
: WHITE
: OFF
: OFF
EXIT RETURN
E-30
3-153
Information
INVERSE Settings
ON ......... The picture is displayed alternately between
positive image and negative image.
You can set the time by pressing the MENU/
ENTER button while "ON" is set.
OFF ....... Inverse mode does not function.
WHITE ... The entire screen turns white.
You can set the time by pressing the MENU/
ENTER button while "ON" is set.
Setting the time for INVERSE/WHITE
Set a time duration.
Example: Setting to that the INVERSE mode starts
in 2 hours and proceeds for one hour and a half.
Perform Steps 1-3 of INVERSE, then...
4. Use the and buttons to select "ON", then press the
MENU/ENTER button.
THE "INVERSE/WHITE" screen appears.
5. Adjust the time using the
The mode switches as follows each time the
button is pressed:
• WORKING TIME
→ON ↔ 00H03M ↔ 00H06M ↔ ..... ↔ 12H42M ↔ 12H45M←
• WAITING TIME
→00H03M ↔ 00H06M ↔ 00H09M ↔ ... ↔ 12H42M ↔ 12H45M←
INVERSE/WHITE
WORKING TIME
WAITING TIME
SEL. ADJ.
Information
Setting the time
WORKING TIME ..... Set the
"INVERSE/WHITE".
When the WORKING TIME is set
to "ON" the mode will stay on.
WAITING TIME ...... Set the standby time until the
"INVERSE/WHITE" mode starts.
* The "WAITING TIME" can not be set when the
"WORKING TIME" is ON.
* THE "WORKING TIME" and "WAITING TIME" can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
* Ending a WORKING TIME function, the monitor will
be STAND BY.
[Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M
←−−−− −−−−→←−−
2 H
Start INVERSE/WHITE Start STAND BY
CONFIDENTIAL
and buttons.
or
: 01H30M
: 02H00M
EXIT RETURN
time duration for
−−→←−−−−
1.5 H