Setting The Input Skip; Resetting To The Default Values - NEC PlasmaSync 50XM3 Model Information
Hide thumbs
Also See for PlasmaSync 50XM3:
- Installation manual (10 pages) ,
- Operation manual (8 pages) ,
- Supplementary manual (28 pages)
Table of Contents
Advertisement
Setting the Input Skip
When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT SELECT button
on the unit.
Example: Set to "ON"
1. On the MAIN MENU, select "OPTION1", then press
the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the
and
buttons to select "INPUT SKIP".
3. To set the INPUT SKIP mode to "ON"...
Use the
and
buttons to select "ON".
The mode switches as follows each time the
button is pressed:
OFF ↔ ON
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
ADJ.
Information
INPUT SKIP settings
OFF ........... Regardless of the presence of the signal,
scan and display all signals.
ON ............. If no input signal is present, skip that
signal.
* "SETTING NOW" will appear during the input search.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
or
1 / 3
:
RGB
:
RGB
:
AUTO
:
1080B
:
ON
:
OFF
EXIT
RETURN
E-27
3-150
Resetting to the default values
Use these operations to restore all the settings (PICTURE,
AUDIO, IMAGE ADJUST, OPTION1~3, etc) to the
factory default values.
Refer to page E-17 for items to be reset.
1. On the MAIN MENU, select "OPTION1", then press
the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the
and
buttons to select "ALL RESET".
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
ADJ.
3. Use the
and
buttons to select "ON", then press the
MENU/ENTER button.
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
MENU/ENTER
OK
ALL RESET
SETTING NOW
When the "SETTING NOW" screen disappears, then
all the settings are restored to the default values.
CONFIDENTIAL
1 / 3
:
RGB
:
RGB
:
AUTO
:
1080B
:
OFF
:
OFF
EXIT
RETURN
1 / 3
:
RGB
:
RGB
:
AUTO
:
1080B
:
OFF
:
ON
EXIT
RETURN
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
