NEC PlasmaSync 50XM3 Operation Manual

Nec plasmasync 50xm3: operation manual
Hide thumbs


PlasmaSync Plasma Monitor
Model Information
For the operation of your plasma monitor,
refer to "Operation Manual".
NEC Solutions (America), Inc.



  Related Manuals for NEC PlasmaSync 50XM3

  Summary of Contents for NEC PlasmaSync 50XM3

  • Page 1 PlasmaSync Plasma Monitor Model Information For the operation of your plasma monitor, refer to “Operation Manual”. NEC Solutions (America), Inc.
  • Page 2: Read Before Operating Equipment

    IMPORTANT SAFETY INSTRUCTIONS (50XM3A/S) Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
  • Page 3 PRÉCAUTIONS IMPORTANTES DE SÉCURITÉ (50XM3A/S) A lire avant de faire fonctionner l’appareil 1. Lire ces instructions. 2. Garder ces instructions. 3. Respecter tous les avertissements. 4. Suivre toutes les instructions. 5. Ne pas utiliser cet appareil près de l’eau. 6. Nettoyer seulement avec un chiffon sec. 7.
  • Page 4 And regarding DVI and power cable, attach the supplied ferrite cores. If you do not do this, this monitor will not conform to mandatory FCC standards. Attaching the ferrite cores: Set the ferrite cores on both ends of the DVI cable (not supplied), and both ends of the power cable (supplied).
  • Page 5: Recommandations Importantes

    Le 50XM3A/S est destiné à être utilisé uniquement avec les unités optionnelles suivantes. Toute utilisation avec d’autres unités optionnelles peut entraîner l’instabilité du placement. Nom du fabricant: NEC Plasma Display Corporation Support: PX-ST1U, PX-ST1U/S, PX-50XM1U-ST Unité de montage mural: PX-W2U, PX-W3U Unité...
  • Page 6: Specifications

    The proglem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact NEC Solutions (America), Inc. and also the manufacturer of the source equipment. Other Features...
  • Page 7: Supported Resolution

    Table of Signals Supported Supported resolution • When the screen mode is NORMAL, each signal is converted to a 1024 dots 768 lines signal. (Except for * • When the screen mode is TRUE, the picture is displayed in the original resolution. •...
  • Page 8: Declaration Of Conformity

    *6 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port. *7 Other screen modes (ZOOM and STADIUM) are available as well.

This manual is also suitable for:

Plasmasync 50xm3aPlasmasync 50xm3asPlasmasync px-50xm3a/sPlasmasync px-50xm3a