Setting The Allocation Of The Audio Connectors; Image Adjust Settings Menu; Adjusting The Position, Size, Fine Picture, Picture Adj - NEC PlasmaSync 50XM3 Model Information

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting "AUDIO INPUT1" to "VIDEO 2"
1. On the MAIN MENU, select "AUDIO", then press the
MENU/ENTER button.
The "AUDIO" screen appears.
2. Use the and buttons to select "AUDIO INPUT1".
3. To set the AUDIO INPUT1 to "VIDEO2"...
Use the and buttons to select "VIDEO2".
The mode switches each time the
pressed, as shown in the table on page E-3.
The available sources depend on the settings of "BNC
INPUT" and "D-SUB INPUT".
AUDIO
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
SEL. ADJ.
Information
AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
or button is
: VIDEO2
: HD/DVD1
: RGB1
EXIT RETURN
E-23
3-146

Image Adjust Settings Menu

Adjusting the Position, Size, Fine Picture, Picture Adj

The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position in the normal
mode
1. On the MAIN MENU, select "IMAGE ADJUST", then
press the MENU/ENTER button.
The "IMAGE ADJUST" menu appears.
Default settings (when RGB/PC is selected)
IMAGE ADJUST
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
SEL. ADJ.
* The settings on the IMAGE ADJUST menu are not
preset at the factory.
To select a mode ...
Use the and buttons to select a mode.
The mode switches as follows each time the
button is pressed:
NORMAL ↔ FULL
* The mode can also be switched by pressing the "WIDE"
button on the remote control.
2. To adjust the vertical position ...
Use the and buttons to select "V-POSITION".
IMAGE ADJUST
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
SEL. ADJ.
3. Adjust using the and
V-POSITION
* If neither the or button is pressed within 5 seconds,
the current setting is set and the previous screen
reappears.
To continue making other computer image
adjustments ...
Repeat from step 2.
CONFIDENTIAL
: NORMAL
: OFF
EXIT RETURN
or
: NORMAL
: OFF
EXIT RETURN
buttons.