Setting High Definition Images To The Suitable Screen Size - NEC PlasmaSync 50XM3 Model Information

Information
RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO .............. Select the suitable mode for the
specifications of input signals as
listed in the table "Computer input
signals supported by this system" on
page E-3 of Model Information.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION .......... The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE1 ............. When an 852 dot
with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot
with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
DTV ................. Set this mode when watching digital
broadcasting (480P).
See page E-3 of Model Information for the details of
the above settings.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the "1080B" mode to "1035I"
1. On the MAIN MENU, select "OPTION1", then press
the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the
3. To set the HD SELECT mode to "1035I" ...
Use the
The mode switches as follows each time the
button is pressed:
→1080B ↔ 1035I ↔ 1080A ←
480 line signal
480 line signal
Information
HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080B ............... Standard digital broadcasts
1035I ............... Japanese "High Vision" signal format
1080A ............... Special Digital broadcasts (for
E-26
3-95
and buttons to select "HD SELECT".
and buttons to select "1035I".
OPTION1 1 / 3
OSM
BNC INPUT : RGB
D-SUB INPUT : RGB
RGB SELECT : AUTO
HD SELECT : 1035 I
INPUT SKIP : OFF
ALL RESET : OFF
NEXT PAGE
SEL. ADJ. EXIT RETURN
example : DTC100)
CONFIDENTIAL
or