NEC PlasmaSync 50XM3 Model Information page 94

To select "ON" for the "WORKING TIME"...
Set the hours of the working time to 0H and the minutes
to 0M. "ON" will be displayed.
SCREEN WIPER
When this is set to ON, a white vertical bar moves
repeatedly from the left and of the screen to the right end
at a constant speed.
Example: Setting "SCREEN WIPER" to "ON"
Perform Steps 1-2 of LONG LIFE, then...
3. Use the and buttons to select "SCREEN WIPER".
4. Use the and buttons to select "ON".
The mode switches as follows each time the
button is pressed:
OFF ↔ ON
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL. ADJ.
Information
SCREEN WIPER
ON ......... The white vertical bar appears.
You can set the time by pressing the MENU/
ENTER button while "ON" is set.
OFF ....... Screen wiper mode does not function.
or
: AUTO
: OFF
: OFF
: ON
: OFF
EXIT
RETURN
E-31
3-154
Setting the time for SCREEN WIPER
Set a time duration and the speed.
Example: Setting to that the SCREEN WIPER mode
starts in 30 minutes and proceeds for one hour and
a half.
Perform Steps 1-3 of SCREEN WIPER, then...
4. Use the and buttons to select "ON", then press the
MENU/ENTER button.
THE "SCREEN WIPER" screen appears.
5. Adjust the time and speed using the
buttons.
The mode switches as follows each time the
button is pressed:
• WORKING TIME
→ON ↔ 00H03M ↔ 00H06M ↔ ..... ↔ 12H42M ↔ 12H45M←
• WAITING TIME
→00H03M ↔ 00H06M ↔ 00H09M ↔ ... ↔ 12H42M ↔ 12H45M←
• SPEED
→1 ↔ 2 ↔ 3 ↔ 4 ↔ 5←
SCREEN WIPER
WORKING TIME
WAITING TIME
SPEED
SEL. ADJ.
Information
Setting the time
WORKING TIME ..... Set the time duration for "SCREEN
WIPER".
When the WORKING TIME is set
to "ON" the mode will stay on.
WAITING TIME ...... Set the standby time until the
"SCREEN WIPER" mode starts.
SPEED ................ Set the moving speed for the
"SCREEN WIPER". The speed
decreases as the number increases.
* The "WAITING TIME" can not be set when the
"WORKING TIME" is ON.
* THE "WORKING TIME" and "WAITING TIME" can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
CONFIDENTIAL
and
or
: 01H30M
: 00H30M
: 3
EXIT RETURN