Advanced Osm Settings Menu; Setting The Menu Mode; Language Settings Menu; Setting The Language For The Menus - NEC PlasmaSync 50XM3 Model Information

REPEAT TIMER
Use this to set two timers. Each timer can use the
DIVIDER, SOURCE and WORK TIME.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)
before the following operations.
Example:
TIMER1...VIDEO1 will be displayed for 3 minutes.
TIMER2...RGB1 will be displayed for 6 minutes in a
2×2 video wall.
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select "REPEAT TIMER".
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER
SEL. ADJ.
4. Use the and buttons to select "ON", then press the
MENU/ENTER button.
The "REPEAT TIMER" screen appears.
5. Adust using the and
The mode switches as follows each time the
button is pressed:
REPEAT TIMER
1 DIVIDER
SOURCE
WORK TIME
2 DIVIDER
SOURCE
WORK TIME
SEL. ADJ.
• DIVIDER
→ 1 ↔ 4 ↔ 9 ←
• SOURCE
The available sources depend on the setting of "BNC
INPUT" and "D-SUB INPUT". See page E-3.
→ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ←
→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD/DVD2 ←
• WORK TIME
→ 00H01M ↔ 00H02M ↔ 00H03M ↔ ..... ↔ 04H14M ↔ 04H15M ←
Information
REPEAT TIMER settings
If you set both timers, Timer 1 and Timer 2 run
consecutively.
In the case of the Video wall, timer No.1 can be used to
control all the displays simultaneously.
* This becomes effective when the on-screen menu goes
out.
: 1
: SPLIT
: OFF
: OFF
: OFF
: OFF
EXIT RETURN
buttons.
or
: 1
: VIDEO1
: 00H03M
: 4
: RGB1
: 00H06M
EXIT RETURN
E-41
3-110

Advanced OSM Settings Menu

Setting the menu mode

This allows you to access full menu items.
When P. ON DELAY or PLE LINK is ON, this won't be
turned OFF.
Example: Setting "ON"
1. On the MAIN MENU, select "ADVANCED OSM".
MAIN MENU
PICTURE
AUDIO
IMAGE ADJUST
OPTION1
ADVANCED OSM
NEXT PAGE
SEL. ADJ.
2. To set the ADVANCED OSM to "ON"...
Use the and buttons to select "ON".
The mode switches as follows each time the
button is pressed:
OFF ↔ ON
MAIN MENU
PICTURE
AUDIO
IMAGE ADJUST
OPTION1
OPTION2
OPTION3
ADVANCED OSM
NEXT PAGE
SEL. ADJ.
Information
ADVANCED OSM settings
ON ...... All of the main menu items are available for
advanced users.
OFF .... Some of the main menu items are not available
(e.g. OPTION2, OPTION3).
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

Language Settings Menu

Setting the language for the menus

The menu display can be set to one of seven languages:
English, German, French, Swedish, Italian, Spanish or
Chinese.
Example: Setting the menu display to "DEUTSCH"
1. On the MAIN MENU, select "LANGUAGE", then
press the MENU/ENTER button.
The "LANGUAGE" screen appears.
2. To select "DEUTSCH" ...
Use the and buttons to select " DEUTSCH".
The mode switches as follows each time the
button is pressed:
CONFIDENTIAL
1 / 2
: OFF
EXIT EXIT
or
1 / 2
: ON
EXIT EXIT
or