Download  Print this page

Reducing Burn-In Of The Screen - NEC PlasmaSync 42VP4 (42Wide VGA) User Manual

Hide thumbs

Advertisement

Reducing burn-in of the screen

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce burn-in of the screen.
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the
and
buttons to select "OPTION2", then
press the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the
and
buttons to select "LONG LIFE", then
press the MENU/ENTER button.
The "LONG LIFE" screen appears.
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SEL.
ADJ.
3. Set the LONG LIFE mode using
See page E-29 to set PLE.
See page E-29 to set ORBITER.
See page E-30 to set INVERSE.
See page E-31 to set SCREEN WIPER.
4. Once the setting is completed...
Press the EXIT button to return to the OPTION2 screen.
To return to the main menu, press the EXIT button once
more.
Information
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
PLE (Peak Luminance Enhancement)
Use this to activate the brightness limiter.
Example: Setting "PLE" to "LOCK1"
Perform Steps 1-2 of LONG LIFE, then...
3. Use the
and
buttons to select "PLE".
4. Use the
and
buttons to select "LOCK1".
The mode switches as follows each time the
button is pressed:
AUTO
LOCK1
LOCK2
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SEL.
ADJ.
:
AUTO
:
OFF
:
OFF
:
OFF
EXIT
RETURN
and
buttons.
or
LOCK3
:
LOCK1
:
OFF
:
OFF
:
OFF
EXIT
RETURN
E-29
3-92
Information
PLE settings
AUTO .............. The brightness of the screen is
adjusted automatically to suit the
picture quality.
LOCK1, 2, 3 .... Sets maximum brightness.
The brightness level decreases in the
order of LOCK 1, 2, 3. LOCK 3
provides minimum brightness.
ORBITER
Use this to set the picture shift.
Example: Setting "ORBITER" to "AUTO1"
Perform Steps 1-2 of LONG LIFE, then...
3. Use the
and
buttons to select "ORBITER".
4. Use the
and
buttons to select "AUTO1".
The mode switches as follows each time the
button is pressed:
OFF
AUTO1
AUTO2
LONG LIFE
PLE
ORBITER
INVERSE
SCREEN WIPER
SEL.
ADJ.
Information
ORBITER settings
OFF .............. Orbiter mode does not function.
AUTO1 ......... The picture moves around the screen
intermittently, making the picture
smaller.
AUTO2 ......... The picture moves around the screen
intermittently, making the picture
bigger.
MANUAL ...... User can adjust the orbiter function
(Horizontal Dot, Vertical Line and
Time) manually.
See the following explanation.
CONFIDENTIAL
or
MANUAL
:
AUTO
:
AUTO1
:
OFF
:
OFF
EXIT
RETURN

Advertisement

Table of Contents
loading

  Related Manuals for NEC PlasmaSync 42VP4 (42Wide VGA)