NEC PX-50XM3A Installation Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Monitor
  5. PlasmaSync PX-50XM3A
  6. Installation manual
NEC PX-50XM3A Installation Manual

NEC PX-50XM3A Installation Manual

50” plasma display
Hide thumbs Also See for PX-50XM3A:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
50XM3 Installation Guide
50" Plasma Display
Contents

Product Description

Type:
Plasma Display
Resolution:
1365x768
Aspect Ratio:
16:9
Color Correction: NEC CCF (Capsulated Color Filter, in panel)
and AccuCrimson (in front filter)
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched
horizontally to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below are the maximum angles that the display can be tilted in both landscape and portrait mode
Landscape
Portrait
www.necvisualsystems.com
30°
10°
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Screen Surface: Anti-Reflective
Dimensions:
Weight:
Max Tilt
NEC Solutions (America), Inc.
Visual Systems
48.1"(W) x 29.0"(H) x 3.8"(D)
96.6 lbs
50XM3
Page 1 of 11
v1.0

Advertisement

Table of Contents
loading

Related Manuals for NEC PX-50XM3A

Summary of Contents for NEC PX-50XM3A

  • Page 1: Table Of Contents

    16:9 Weight: 96.6 lbs Color Correction: NEC CCF (Capsulated Color Filter, in panel) and AccuCrimson (in front filter) Notes This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation.

  • Page 2: Ventilation Requirements

    NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.

  • Page 3: Display Dimensions

    Display dimensions Filter Surface 44.33 43.54 (Screen Area) 20.55 48.11 LED & IR 0.79 0.79 0.79 0.79 Control Buttons 0.79 4.92 15.20 2.46 1.46 Speaker Terminal AC Inlet Power Button 18.11 5.94 www.necvisualsystems.com 50XM3 Page 3 of 11...

  • Page 4: Rear, Left & Right Side

    Display dimensions (cont.) 8-M4*14 MAX for mount option 4-M4*10 MAX for PC option 20.87 17.52 4.08 25.75 48.11 0.469 for speaker option 3.78 0.217 0.216 16.89 16.16 15.49 14.86 14.27 13.68 13.13 12.34 11.63 10.93 10.22 9.51 8.25 7.15 5.89 3.07 1.93 1.30...

  • Page 5: Display Dimensions W/Optional Speakers And Stand

    Dimensions with optional speakers and stand 3.78 (Screen Area) 43.54 32.05 6.72 48.11 15.75 55.24 www.necvisualsystems.com 50XM3 Page 5 of 11...

  • Page 6: Dimensions W/Optional Flat Wall Mount

    Dimensions with optional Flat Wall Mount Kit (FWMK) 16.0 12.0 24.0 12.1 Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2) due to a higher center of gravity. (mount pattern is the same) www.necvisualsystems.com 50XM3 Page 6 of 11...

  • Page 7: Dimensions W/Optional Tilt Wall Mount

    Dimensions with optional Tilt Wall Mount Kit (TWMK) 16.0 12.1 24.0 12.0 12.9 Depth at 15° Tilt Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2) due to a higher center of gravity. (mount pattern is the same) www.necvisualsystems.com 50XM3 Page 7 of 11...

  • Page 8: Dimensions W/Optional Ceiling Mount

    Dimensions with optional Ceiling Mount Kit (CMK) 16.2 16.0 15.9 Tilt Range: 0° - 15° 24.3 23.8 12.0 Tilt 0° Tilt 15° Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2) due to a higher center of gravity. (mount pattern is the same) www.necvisualsystems.com 50XM3 Page 8 of 11...

  • Page 9: Portrait Mode

    Portrait Mode Rotating the Display The display must be rotated clockwise so the input panel is at the bottom and vents are at the top. Rotating the display counter-clockwise will not allow the unit to cool properly and will void the warranty. Vents Rotate Clockwise...

  • Page 10: Connections

    Connections LOCATED AT BOTTOM OF DISPLAY POWER EXT. SPEAKERS www.necvisualsystems.com 50XM3 Page 10 of 11...

  • Page 11: Control Codes

    THEAT.2 DEFAULT SCREEN MODE: STADIUM ZOOM NORMAL FULL AUTO PICTURE CINEMA MODE NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Parity: Communication: Asynchronous Stop Bit: 1 bit...

This manual is also suitable for:

50xm3

Table of Contents