Enabling/Disabling The Front Panel Controls; Enabling/Disabling Remote Control Wireless Transmission - NEC PlasmaSync 50XM3 Model Information

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.
Example: Setting "ON"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select "OPTION3", then press
the MENU/ENTER button.
The "OPTION3" screen appears.
2. Use the and buttons to select "CONTROL
LOCK".
3. To set the CONTROL LOCK to "ON"...
Use the and buttons to select "ON", then press the
MENU/ENTER button.
The mode switches as follows each time the
button is pressed:
OFF ↔ ON
OPTION3
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
SEL. ADJ.
Information
CONTROL LOCK settings
ON ...... Disables the buttons on the front panel.
OFF .... Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
or
3 / 3
: LAST
: ON
: ON
: OFF
: ALL
EXIT RETURN
E-36
3-105
Enabling/disabling remote control wireless
transmission
This function enables/disables remote control wireless
transmission.
Example: Setting "OFF"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select "OPTION3", then press
the MENU/ENTER button.
The "OPTION3" screen appears.
2. Use the and buttons to select "IR REMOTE".
3. To set the IR REMOTE to "OFF"...
Use the and buttons to select "OFF", then press
the MENU/ENTER button.
The mode switches as follows each time the
button is pressed:
OFF ↔ ON
OPTION3
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
SEL. ADJ.
Information
IR REMOTE settings
ON ...... Enables remote control wireless transmission.
OFF .... Disables remote control wireless transmission.
Set "OFF" to avoid unwanted control from
other remote controls.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
CONFIDENTIAL
or
3 / 3
: LAST
: OFF
: OFF
: OFF
: ALL
EXIT RETURN