Table of Contents
Advertisement
7.
Take the toner cartridge out of the box, and
gently shake it several times as shown in
the diagram to distribute the toner evenly.
8.
Remove the top part of the seal from the
toner cartridge and pull the seal straight off,
keeping it parallel with the toner cartridge.
Important
• When pulling out the seal, pull it out horizontally. The
tape might break if it is pulled out diagonally.
• After the seal has been pulled out, do not shake or
bump the toner cartridge.
9.
Insert the toner cartridge by facing the label
on the cartridge to the front and aligning it
with the arrows on the printer.
Important
• Do not touch any parts inside the printer.
10. Push down the lever on the right of the
toner cartridge to turn
11. Close the front door.
12. Another toner cartridge is ready to be replaced when the [Ready to Eject] message is
displayed on the control panel. To quit the replacement, press the <Menu> button.
13. After replacing the black toner cartridge, clean the inside of the printer to maintain
conditions for good printing quality as described in "5.2 Cleaning Inside the Printer"
(P. 49).
64
6 Daily Care
mark to
mark.
Advertisement
Table of Contents
