3-10.Plc Software For Demand Input [Pac-Yg41Cda] - Mitsubishi Electric PURY-WP-YJM-A Data Book

3. System remote controller
3-10. PLC software for demand input [PAC-YG41CDA]
MITSUBISHI ELECTRIC's HYBRID CITY MULTI has its intelligent way to carry out peak-cut control while maximizing the air
conditioning effect.
System example
- Energy saving setting
- Monitoring of current energy saving
state
PC for TG-2000A
Collects daily
power
consumption
Necessary parts for the system
Name (Model name)
PC for central control
TG-2000A
AG-150A/GB-50ADA
Energy management license pack
Web monitor license
The registration of
energy saving control
License
or peak cut control is
necessary.
CENTRALIZED CONTROLLER AG-150A
AG-150A
(GB-50ADA)
Collects current
daily consumption
(every per minute)
PLC PAC-YG11CDA
(Pulse counting
software installed)
Requires to execute the peak cut control.
Either method should be used.These methods cannot be used together.
PLC
(PLC software
for demand input)
Up to 10 AG-150A/GB-50ADA can be connected to 1 PLC(PLC software for demand input).
If the number of AG-150A/GB-50ADA exceeds 11 sets, more than 1 PLC is required.
Manufacturer
PC/AT convertible unit Confirmed operation of DELL, HP.
For details, refer to AG-150A Technical Manual.
MITSUBISHI ELECTRIC The latest version is recommended.
MITSUBISHI ELECTRIC The latest version is recommended.
MITSUBISHI ELECTRIC Requires for each AG-150A/GB-50ADA.
MITSUBISHI ELECTRIC Requires for each AG-150A/GB-50ADA.
CONTROLLER
- Set temperature control (
- Fan (thermostat OFF) control
- Stopping control
HBC
controller
- Capacity saving control
(60/70/80/90%)
Watt-hour
meter
Counts for electric power pulse
Demand
controller
Contact input (4 levels max.)
Remarks
3.6
or
3 - 52