3-8.Plc Software For General Equipment [Pac-Yg21Cda] - Mitsubishi Electric PURY-WP-YJM-A Data Book

3. System remote controller
3-8. PLC software for general equipment [PAC-YG21CDA]
MITSUBISHI ELECTRIC's Air Conditioner control system can combine control of general equipment like lighting, air condition-
ers from other manufacturers, etc.
Functions on general equipment : On/Off operation, alarm, monitoring, scheduling.
System example
LAN
*2
AG-150A
license Input
Power supply unit
PAC-SC51KUA
*2 When AG-150A is connected with PAC-YG50ECA, PAC-YG21CDA cannot be used.
Necessary parts for the system
Materials (model names)
PC for central control
TG-2000A
Web monitor license
PLC for general equipments license
PLC
PAC-YG21CDA
CENTRALIZED CONTROLLER AG-150A
HBC controller
HBC controller
Pulse or Level output
Level input
PLC
PLC software for general equipment
PAC-YG21CDA
PC for TG-2000A
TG-2000A installed.
Manufacturer
PC/AT compatible
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
CONTROLLER
*1
M-NET
*1.MITSUBISHI ELECTRIC Air Conditioner network.
M-NET *1
Other manufacturer's packaged
air-conditioning units
Other manufacturer's fan coil units
Remarks
Confirmed operation of DELL, HP.
For details, refer to AG-150A Technical Manual.
The use of the latest version of TG-2000A and AG-150A
/GB-50ADA is recommended.
Requires for each AG-150A/GB-50ADA.
Table-setting of input/output is necessary.
Make sure DI board and DO board are mounted.
For details, refer to AG-150A Technical Manual.
Free contact
(input and output signal)
Lighting
Chiller/heat source
machine
3 - 49