Specifications; Outdoor Units - Mitsubishi Electric PURY-WP-YJM-A Data Book

1. SPECIFICATIONS

I.HYBRID CITY MULTI 1. SPECIFICATIONS
Model
Power source
Cooling capacity
(Nominal)
Power input
Current input
COP
Temp. range of Indoor
cooling Outdoor
Heating capacity
(Nominal)
Power input
Current input
COP
Temp. range of Indoor
heating Outdoor
Indoor unit Total capacity
connectable Model / Quantity
Sound pressure level (measured in anechoic room) dB <A>
Power pressure level (measured in anechoic room) dB <A>
Refrigerant High pressure
piping diameter Low pressure
FAN Type x Quantity
Air flow rate
Control, Driving mechanism
Motor output
*3 External static press.
Compressor Type x Quantity
Manufacture
Starting method
Motor output
Case heater
Lubricant
External finish
External dimension HxWxD
Protection devices High pressure protection
Inverter circuit (COMP./FAN)
Fan motor
Refrigerant Type x original charge
Control
Net weight
Heat exchanger
HIC circuit (HIC: Heat Inter-Changer)
Defrosting method
Drawing External
Wiring
Standard attachment Document
Accessory
Optional parts
Remarks
Notes :
1.Nominal HVRF cooling conditions
Indoor: 27 °CD.B./19 °CW.B. (81 °FD.B./66 °FW.B.), Outside: 35 °CD.B. (95 °FD.B.)
Water pipe length: 5 m (16-3/8 ft.), Refrigerant pipe length: 2.5 m (8-3/16 ft.), Level deference: 0 m (0 ft.)
2.Nominal HVRF heating conditions
Indoor: 20 °CD.B. (68 °FD.B.), Outside: 7 °CD.B./6 °CW.B. (45 °FD.B./43 °FW.B.)
Water pipe length: 5 m (16-3/8 ft.), Refrigerant pipe length: 2.5 m (8-3/16 ft.), Level deference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH
PURY-WP200YJM-A
3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling 100%
*1 kW
*1 kcal/h
*1 BTU/h
kW
A 8.0-7.6-7.4
kW/kW
W.B. 15.0~24.0 °C (59~75 °F)
D.B. -5.0~46.0 °C (23~115 °F)
Heating 100%
*2 kW
*2 kcal/h
*2 BTU/h
kW
A 8.9-8.4-8.1
kW/kW
D.B. 15.0~27.0 °C (59~81 °F)
W.B. -20.0~15.5 °C (-4~60 °F)
WP15~WP50/1~20
mm (in.) 15.88 (5/8) Brazed
mm (in.) 19.05 (3/4) Brazed
Propeller fan x 1
3
m /min
L/s
cfm
Inverter-control, Direct-driven by motor
kW
0 Pa (0 mmH
Inverter scroll hermetic compressor
AC&R Works, MITSUBISHI ELECTRIC CORPORATION
kW
kW 0.045 (240 V)
Pre-coated galvanized steel sheets (+powder coating for -BS
<MUNSELL 5Y 8/1 or similar>
mm 1,710 (1,650 without legs) x 1,220 x 760
in. 67-3/8 (65 without legs) x 48-1/16 x 29-15/16
High pressure sensor, High pressure switch at 4.15 MPa (601
Over-current protection
Thermal switch
R410A x 11.8 kg (27 lbs)
LEV and HIC circuit
kg (lbs)
Salt-resistant cross fin & copper tube
Auto-defrost mode (Reversed refrigerant cycle)
Installation Manual
Refrigerant conn. pipe
Details on foundation work, duct work, insulation work, electri-
cal wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
Due to continuing improvement, above specifications may be
subject to change without notice.
O, 6.1 mmH O).
2 2

OUTDOOR UNITS

22.4
19,300
76,400
4.79
4.67
25.0
21,500
85,300
5.28
4.73
50~150%
60
80
225
3,750
7,945
0.92 x 1
O)
2
AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Inverter
5.4
MEL32
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
High pressure sensor, High pressure switch at 4.15 MPa (601
psi)
270 (596)
-
-
-
Details on foundation work, duct work, insulation work, electri-
cal wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
Due to continuing improvement, above specifications may be
subject to change without notice.
PURY-WP250YJM-A
3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling 100%
28.0
24,100
95,500
6.99
11.8-11.2-10.8
4.00
15.0~24.0 °C (59~75 °F)
-5.0~46.0 °C (23~115 °F)
Heating 100%
31.5
27,100
107,500
6.98
11.7-11.1-10.7
4.51
15.0~27.0 °C (59~81 °F)
-20.0~15.5 °C (-4~60 °F)
50~150%
WP15~WP50/1~24
60
80
19.05 (3/4) Brazed
22.2 (7/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control, Direct-driven by motor
0.92 x 1
0 Pa (0 mmH O)
2
Inverter scroll hermetic compressor
Inverter
6.8
0.045 (240 V)
MEL32
type)
<MUNSELL 5Y 8/1 or similar>
1,710 (1,650 without legs) x 1,220 x 760
67-3/8 (65 without legs) x 48-1/16 x 29-15/16
psi)
Over-current protection
Thermal switch
R410A x 11.8 kg (27 lbs)
LEV and HIC circuit
270 (596)
Salt-resistant cross fin & copper tube
-
Auto-defrost mode (Reversed refrigerant cycle)
-
-
Installation Manual
Refrigerant conn. pipe
Unit converter
kcal =kW x 860
BTU/h =kW x 3,412
3
cfm =m /min x 35.31
lbs =kg / 0.4536
*Above specification data is
subject to rounding variation.
2 - 4