Mitsubishi Electric PURY-WP-YJM-A Data Book page 132

3. System remote controller
4. Requirements (system recommendations)
We recommend the following software and hardware when using this application (TG-2000A).
When AG-150A(GB-50ADA)/G-50A-compatible
TG-2000A is used
When G-50A-compatible TG-2000A
is used with the range of conventional functions
*1 : TG-2000A Ver.5.20 is upgraded to Ver.5.50 or later.
*2 : Use ver. 6.10 or later for the AG-150A systems with connection to expansion controllers (PAC-YG50ECA).
*3 : Use ver. 6.34 or later for the GB-50ADA systems.
*4 : Use Ver. 6.34 or later on Windows 7.
Item
PC/AT interchangeable machine
PC
(Business model is recommended)
TM
Core
CPU
(Windows7 / Vista for Core
Pentium® M
Pentium® 4
Memory
In Windows 7 / Vista : 1GB or more
In Windows XP / 2000 : 512MB or more
HDD Standard
Wide area
Storage device CD-ROM drive, USB drive
Resolution 1024 x 768 or higher, 65536 colors or more
Serial port 1 port or more
LAN 1 port (100BASE-TX/10BASE-T)
Modem 56K modem or TA
USB 2 port or more
Windows® 7 Professional (64bit / 32bit)
Windows Vista® Business (32bit)
OS
Windows® XP Professional (32bit)
Windows® 2000 Professional
Computer must be dedicated for this use
Other
(TG-2000A).
*1 Purchase the option, or use the equipment recommended for the computer when purchasing the computer.
*2 Make sure that the correct version of Service Pack is installed. If the wrong version of Service Pack is installed, TG-2000A will not be set up properly.
The above contents are subject to change along with TG-2000A version upgrade.
TG-2000A Ver.5.50 or later *1 *2 *3
TG-2000A Ver.5.30 or later
Requirement
2 Duo 1.66GHz or faster
TM
2 Duo)
1.7GHz or faster
2.4GHz or faster
6GB or more (2GB or more of C
drive free space necessary)
20GB or more (Free space)
Service Pack 1
Service Pack 2
Service Pack 3 *2
Service Pack 4 *2
CONTROLLER
TG-2000A version
OS : Windows7 *4/Vista/XP
Refer to the table below for details.
OS : Windows XP/2000
Refer to the table below for details.
Operation check completed, using HP and DELL
TM
Core 2 Duo 2.4GHz or faster
Pentium® M 2.0GHz or faster
Pentium® 4 2.8GHz or faster
2GB or more
1GB or more
40GB or more of C drive free space necessary
When using the trend function, the drive used for
automatic output must have the following free
space according to the number of groups.
200 groups = 2GB, 500 Groups = 5GB, 1000
groups = 10GB, 2000 groups = 20GB
Standard : max. 200MB/site
Devices other than those shown at the left may also
be installed.
Required when using RS-485 communication WHM
(Not necessary when using PLC or PI Controller)
* 1
Required when using a modem in wide area mode.
It uses it for the data backup.
English version only
*Computer must support each OS.
Operation check completed, using Windows 7
Professional (64bit)
Cannot be used with G-50A-compatible TG-2000A.
English version only
*Computer must support each OS.
Cannot be used with G-50A-compatible TG-2000A.
English version only
*Computer must support each OS.
English version only
*Computer must support each OS.
Cannot be used with AG-150A (GB-50ADA)/
G-50A-compatile TG-2000A.
Must be used for 24-hour constant operation
(Only some functions. Refer to the TG-2000A manual for details.)
System Requirements
Recommended
3 - 47