Mitsubishi Electric PURY-WP-YJM-A Data Book page 185

2. M-NET control
2-4-2. Rule of setting address
Unit
Indoor unit
Outdoor unit
HBC controller
ME, LOSSNAY
Remote controller
(Main)
ME, LOSSNAY
Remote controller
(Sub)
ON/OFF remote
controller
AG-150A
GB-50ADA
AT-50A
PAC-YG50ECA
BAC-HD150
LMAP04-E
Note1: To set the address to "100", set it to "50"
Note2: Outdoor units OC, OS1 and OS2 in one refrigerant circuit system are automatically detected.
OC, OS1 and OS2 are ranked in descending order of capacity. If units are the same capacity, they are ranked in ascending
order of their address.
Address setting Example
01 ~ 50
10
51 ~ 99, 100
(Note1)
10
52 ~ 99, 100
10
1
101 ~ 150
Fixed
10
1
151 ~ 199, 200
Fixed
10
000, 201 ~ 250
100 10
0,2 0~5
000, 201 ~ 250
100 10
0,2 0~5
000, 201 ~ 250
100 10
0,2 0~5
000, 201 ~ 250
100 10
2
201 ~ 250
Fixed
10
SYSTEM DESIGN
Use the most recent address within the same group of
indoor units.
1
The smallest address of indoor unit in same refrigerant
system + 50
Assign sequential address numbers to the outdoor
units in one refrigerant circuit system. OC, OS1 and
OS2 are automatically detected. (Note 2)
1
Please reset one of them to an address between 51
and 99 when two addresses overlap.
The address automatically becomes "100" if it is set
as "01~ 50"
The address of outdoor unit + 1
Please reset one of them to an address between 51
and 99 when two addresses overlap.
The address automatically becomes "100" if it is set
1
as "01~ 50"
The smallest address of indoor unit in the group + 100
The place of "100" is fixed to "1"
1
The address of main remote controller + 50
The address automatically becomes "200" if it is set
as "00"
1
The smallest group No. to be managed + 200
The smallest group No. to be managed is changeable.
1
0~9
1
0~9
Settings are made on the initial screen of AG-150A.
1
0~9 Settings are made with setting tool of BM ADAPTER.
1
1
Note
4 - 14