Permobil K Service Manual page 41

Fuses
Assembly
Assemble in the reverse order.
1. Switch the new main fuse to OFF.
2. Connect the cables to the new main fuse.
m CAUTION!
Note the direction in which the fuse is installed for subsequent
fitting. The ON/OFF position must match the appropriate
sticker on the chassis.
Check that the cables are firmly attached.
3. Fit the new main fuse on the bracket with the two nuts (see fig. below).
4. Reattach the battery connection cables to the batteries.
5. Fit the chassis covers. See page 8-9.
6. Switch the main fuse to ON (see fig.).
For this task the following tools are necessary:
1 Wrench 6 mm.
1 Phillips head screwdriver
Main fuse cable connection.
On chassis with R-net Control System the
Main Fuse is fitted with two nuts.
Off
Main fuse/battery isolator (On/Off).
43
Fuses
On