Pivot wheels
Taking the rim apart
The rim can be taken apart to make it possible to
fit/remove solid tires.
1. Remove the wheel in question from the
wheelchair. See the previous page.
2. Remove the three screws holding the two
halves of the rim together (see illustration).
3. Take the rim apart.
Assembly
Assemble in the reverse order.
1. Fit the two rim halves (2&4) together with tire (3).
2. Tighten the three screws using a torque wrench.
Tightening torque: 9.8Nm
3. Fit the wheel on to the wheelchair. See previous page.
1
For this task the following tools are necessary:
1
3
2
Fitting a tire on the split rim.
15
15
Allen key 5 mm.
4
5
Pos.
Description
1
Locking nut, ISO 7040 M6 8 FE/n
2
Rim, inner section
3
Tire, Solid 200x50
4
Rim, outer section
5
Screw, ISO 4762 M6x30 8.8 Fe/Zn
Pivot wheel