Control System - Permobil K Service Manual

Control system

The wheelchair's control system can be programmed in order to optimize the performance of the
wheelchair while also maintaining a high level of safety regardless of the wheelchair's other settings
and equipment. The control system can also be programmed in order to make adjustments needed for a
specific user.
For more information on programming the VR2 control system and obtaining parameter files, see the
technical user manual for programming Pilot+ / VSI / VR2 (Art.no. 205009-SE-0).
For more information on programming/adjustment of the Rnet control system and obtaining parameter
files, see the technical user manual for programming R-net. (Art.no. 205222-SE-0).
m WARNINg!
If the seat is raised above the standard position for wheelchairs equipped with a fixed seat tube, it is recommended that the
wheelchair's control system be programmed so that the parameter for maximum forward speed is set to 75%. This particularly
applies if the user's weight exceeds 100 kg.
47 47
Control system
.