Support Wheel Bracket - Permobil K Service Manual

Support wheel bracket

Removal
1. Switch off the main power switch on the control panel.
2. Remove the rear wheel on the side in question. See the illustration above.
3. Remove the two screws (2) that hold the support wheel bracket in place at the rear (see illustration).
At the same time, lift the support wheel carefully to make it easier to remove the screws. Please note
that the spring in the top edge of the bracket now comes loose.
4. Remove the screw (1) that holds the support wheel bracket in place at the front (see illustration).
Assembly
Assemble in the reverse order. Begin with the front screw (1) and associated spacer and washer. Then
replace the spring before fitting the two remaining screws (2) with associated spacers and washers. Lift
the support wheel carefully to make it easier to fit the two rear screws.
Attaching the support wheel.
17 17
Support wheel bracket
2
1