Table of Contents
Advertisement
Warning:
We highly recommend that you use T2BSM32-256 or T2BSM32-512
cache modules. If you are using cache modules other than the ones
recommended above, make sure your cache module meet the Intel
COAST 1.3 specification. Severe damage might occur on the cache
module or system board if you insert modules other than those speci-
fied above.
Installing the Cache Module
Locate the 160-pin cache module slot on the system board. Position the
cache module above the slot. Make sure pin 1 of the cache module is
aligned with pin 1 of the slot. Carefully slide the module into the slot.
Press firmly on the top of it to seat it properly.
Note:
With the cache module installed in the cache module slot, the compo-
nents on the solder side of the add-in card in PCI Slot 3 must not pro-
trude more than 5mm. There is no limit to the length of the add-in card
installed in PCI Slot 3.
15
Advertisement
Table of Contents
