Table of Contents
Advertisement
Halt on
This category controls whether the system will halt in case an error is
detected during power up.
No Errors: The system boot will not stop for any detected errors.
All Errors: The system will stop whenever the BIOS detects a
non-fatal error.
All, But Keyboard: The system will stop for any error except a
keyboard error.
All, But Diskette:
The system will stop for any error except a
disk error.
All, But Disk/Key:
The system will stop for any error except a
keyboard or disk error.
Memory
The lower right hand corner shows the base memory size, extended
memory size, and the other memory size of your system. You cannot
alter these items; your computer automatically detects and displays
them.
The Other Memory size refers to the memory located in the 640K to
1024K address space. This is the memory used for different applica-
tions. DOS uses this area to load device drivers to free base memory
for application programs.
When you are through making changes in the Standard CMOS Setup,
press <Esc> to return to the main menu.
37
Advertisement
Table of Contents
