Auto
This option indicates that the parameters for your hard disk drive(s) will
be automatically detected and displayed when you boot your system.
By default, the LBA mode is selected for a hard disk drive larger than
528 Megabytes. If you decide not to accept the LBA mode, you can
either specify your selection in the " IDE HDD Auto Detection" menu, or
use the User option described below.
User
This type is user definable and allows you to enter the specifications
yourself directly from the keyboard. Six categories of information are
required: Size, Cylinders, Heads, Precomp, LandZone and Sectors.
This information should be provided by your hard disk vendor or sys-
tem manufacturer. However, we recommend you use the " IDE HDD
Auto Detection" which provides a more efficient way to setup your hard
drive.
46 Predefined Drive Specifications
Please refer to your hard disk documentation for the appropriate type
number.
None
Select <None> and press <Enter> if a hard drive is not installed.
Drive A and Drive B
These options are used to select the type of floppy disk drives installed
in your system. If neither drive is present, select " None" . Make sure you
choose the correct drive type; otherwise, your system might format the
device improperly.
Video
This is used to select the type of video adapter installed in your sys-
tem.
36