Cache Configuration; Installing The Cache Module - DFI G586IPBS User Manual

G586IPBS

Cache Configuration

The G586IPBS system board supports 3.3V pipeline burst or
asynchronous cache SRAM installed in the 160-pin cache
module slot. The board can be configured to the following
cache sizes: 256KB and 512KB.

Installing the Cache Module

1. Locate the 160-pin cache module slot on the system
board. Position the cache module above the slot. Make
sure pin 1 of the cache module is aligned with pin 1 of
the slot. Carefully slide the module into the slot. Press
firmly on the top of it to seat it properly.
Note:
You do not need to modify any jumpers when installing the
cache module.
17
Cache Module Slot