Table of Contents
Advertisement
1. Position the SIMM above the socket with the " notch" in the module
aligned with the " key" on the socket.
2. Seat the module at a 45° angle into the bank. Make sure it is com-
pletely seated. Tilt the module upright until it locks in place in the
socket.
Cache Memory
The G586IPB/E system board can support 256KB or 512KB pipeline
burst, direct map write-back cache SRAM. Your system board may
come with 0KB or 256KB cache mounted onboard. The 160-pin cache
module slot lets you upgrade your cache memory by installing a 256KB
or 512KB cache module.
Note:
You do not need to set any jumpers or modify the Award BIOS Setup
utility when you install the cache module.
If your system board comes with 0KB cache, you can install a 256KB or
512KB cache module in the cache module slot. If your system board is
installed with 256KB onboard cache on locations U22 and U23, you can
upgrade your cache memory to 512KB by installing a 256KB cache
module in the cache module slot. Please refer to page 12 for the loca-
tions of the cache module slot (SSM1), U22 and U23.
Onboard Cache
0KB
256KB
14
notch
key
Upgradeable Cache Module
upgradeable with a 256KB or 512KB cache module
upgradeable with a 256KB cache module for a
maximum of 512KB cache
Advertisement
Table of Contents
