Installing the Cache Module
Locate the 160-pin cache module slot on the system board (SSM1).
See pages 12 and 13 for the location. Position the cache module above
the slot. Make sure pin 1 of the cache module is aligned with pin 1 of
the slot. Carefully slide the module into the slot. Press firmly on the top
of it to seat it properly.
Note:
With the cache module installed in the cache module slot, the compo-
nents on the solder side of the add-in card in PCI Slot 1 and 2 must not
protrude more than 5mm. There is no limit to the length of the add-in
card installed in PCI Slot 3.
18