Timer Operation; Setting The Timer; Cancelling The Timer - Toshiba MD-VNK802HEXE Service Manual

6

Timer Operation

Select a timer type from the following three: (Max. 168 hours)
OFF timer
Repeat-OFF timer
On timer

Setting the timer

1
Push the
The operation lamp lights up.
2
Push the button.
Each time the button is pushed, the timer mode
and indication change in the following order:
(OFF timer) (Repeat-OFF timer)
No indication
and the time indication blink.
3
Push the buttons to set the period of
time until the timer actions.
• The time setting increases in 0.5-hour (30
minute) increments each time you push
The setting increases in 1-hour increments if it is
over 1 day (24 hours). The maximum is 7 days
(168 hours).
On the remote controller, settings between 0.5
hours and 23.5 hours (*1) are displayed as is.
For settings over 24 hours (*2), the days and
hours are displayed.
• The time setting decreases in 0.5-hour (30
minute) decrements (0.5 hours to 23.5 hours) or
1-hour decrements (24 hours to 168 hours)
each time you push
Example of indication on the remote controller
1
• 23.5 hours (* )
: Stops running after a specified period.
: Stops running after a specified period every time you use the unit.
: Starts running after a specified period.
button to start operation.
(ON timer)
.
2
• 34 hours (* )
Days Hours
indicates 1 day
(24 hours).
indicates 10 hours.
(Total: 34 hours)
4
Push the
• disappears, the time indication is
displayed, and
(When using the ON timer, all indications other
than the time indication and

Cancelling the timer

.
1
Push the
The timer indicator disappears.
NOTE
• When using the Repeat-OFF timer, pressing the
button after the unit has been stopped by
the timer starts it running again, and the unit will stop
again after the specified period.
• The nighttime heat purge operation is activated, the
unit is running the activated operation while the unit
stops following the timer setting.
130
Owner's Manual
button.
or flashes.
turn off.)
button.