Toshiba MD-VNK802HEXE Service Manual page 127

15
Louver Number display. (*1)
16
Power saving mode display
Displayed during capacity saving mode.
17
Louver lock indicator (*1)
18
UNIT No. indicator
The number of the Air to Air Heat Exchanger with
DX Coil Unit selected using the UNIT button or that
of the unit in which an error has occurred.
19
Central control indicator
Displayed when a central control device such as a
central controller is also used. If the central control
device prohibits the use of local remote
controllers, blinks when any of the
or TEMP. buttons are pressed and the
operation is rejected.
The items controllable with the remote differ
depending on the mode of central control. Refer to
the owner's manual of the central control device
you are using for more information
20
Operation mode controlled indicator
Displayed when MODE button is pushed while
operation mode is fixed to cool or heat by the air
conditioner administrator.
21
Operation ready display (*1)
This display appears on some models.
22
Service display
Displayed while the protective device works or a
trouble occurs.
23
Ventilation fan speed indicator
Indicates the ventilation fan's speed.
, or
When the remote is used to control air
conditioners together with the Air to Air Heat
Exchanger with DX Coil Unit as a group, VENT
,
,
is indicated.
125
FAN indicator appears (blinks) only when the
button is pressed.
(High)
(Low)
(SA > EA)
(SA < EA)
24
Ventilation mode indicator
Indicates the selected ventilation mode.
is indicated.
(Automatic mode)
(Heat exchange mode)
25
Nighttime heat purge indicator
Displayed during the nighttime heat purge
operation. (*2)
26
Humidification indicator (VNK type only)
Displayed during humidifying.
27
Ventilation indicator
If the remote is used to control the Air to Air Heat
Exchanger with DX Coil Unit in a system linked
with air conditioners, and separate operation of the
unit is set to available, the indicator is displayed
while the unit is running.
* The indicator is not displayed when the unit is
running in a system equipped with only the Air to
Air Heat Exchanger with DX Coil Unit.
(*1):
Not displayed. These functions are not available for Air
to Air Heat Exchanger with DX Coil Unit.
(*2):
Displayed when these operation modes are activated.
Owner's Manual
* Displayed when
(*2)
the setting is
(*2)
activated.
or