Toshiba MD-VNK802HEXE Service Manual page 185

No. Component
5 Electrical control
cover
5.
6 Removing
motor wire
5., 6.
7 Cover
1., 2., 7.
8 Fan
1. to 4.,
6. to 10.
Procedure
5.Remove the four screws (M4 × 10) that fix the
electrical control cover, and then remove the cover.
6.Open the electrical control cover, and disconnect the
two connectors (black, white) connected to the
connectors of motor.
7.Remove the two screws (M4 × 10) that fix the cover,
and then remove the cover.
8.Release the big clamp that fixes the cords of the
supply motor and exhaust motor.
9.Remove the eight screws that fix the motor holder,
hold the holder, and then slide it to the center of the
product to remove it.
Machine screws
with captive washer
(M8 × 16)
183
Note
Screws (M4 × 10)
Push this part with
your nail to disconnect
the connector.
Screws (M4 × 10)
Exhaust motor Supply motor
Big clamp
Clamp
Release
Machine screws
with captive washer
(M8 × 16)
Screws (M4 × 6)
Screws (M4 × 6)