Toshiba MD-VNK802HEXE Service Manual page 164

System example
C. Central control system
(When controlling groups of air conditioners and the Air to Air Heat
Exchanger with DX Coil Unit separately)
Outdoor unit
Air
Air
conditioner conditioner
Remote controller NRC-
01HE / RBC-AMT32E
D. Central control system
(When controlling the Air to Air Heat Exchanger with DX Coil Unit
system linked with air conditioners)
Outdoor unit
Air conditioner
Air conditioner
Remote controller
NRC-01HE / RBC-
AMT32E
* The Air to Air Heat Exchanger and the Air to Air Heat Exchanger with DX Coil Unit cannot be used together in
the same system.
Central controller for 64 / 128
units / groups TCB-SC642TL2 /
TCB-SC1280TLE
Air to Air Heat Air to Air Heat
Exchanger with Exchanger with
DX Coil Unit DX Coil Unit
Remote controller NRC-
01HE / RBC-AMT32E
Central controller for 64 / 128
units / groups TCB-SC642TL2
/ TCB-SC1280TLE
Air to Air Heat Air to Air Heat
Exchanger with Exchanger with
DX Coil Unit DX Coil Unit
Remote controller
NRC-01HE / RBC-
AMT32E
The Central controller can be used to ON/OFF the whole system
and separately ON/OFF groups of air conditioners and the Air
to Air Heat Exchanger with DX Coil Unit.
The Central controller cannot be used to control the ventilation
FAN speed or select the ventilation mode of the Air to Air Heat
Exchanger with DX Coil Unit.
If two remote controllers are used, the latter operation
overrides the former and their indications always reflect the
result of the latter operation.
* Use NRC-01HE or RBC-AMT32E to control only the group of the
Air to Air Heat Exchanger with DX Coil Unit. You cannot control
the ventilation FAN speed or select the ventilation mode when
using RBC-AMT32E.
The Central controller can be used to ON/OFF the whole
system.
The compliant manager cannot be used to control the
ventilation FAN speed or select the ventilation mode of the Air
to Air Heat Exchanger with DX Coil Unit.
You can control the ventilation FAN speed and select the
ventilation mode of the Air to Air Heat Exchanger with DX Coil
Unit using NRC-01HE.
You cannot control the ventilation FAN speed or select the
ventilation mode of the Air to Air Heat Exchanger with DX Coil
Unit using RBC-AMT32E.
If two remote controllers are used, the latter operation
overrides the former and their indications always reflect the
result of the latter operation.
* You can start and stop only the Air to Air Heat Exchanger with DX
Coil Unit in the system using NRC-01HE. For this operation, it is
necessary to change the settings.
* Setting modifications are required for separate control.
Refer to "13. Advanced Control" on page 169.
* When the Air to Air Heat Exchanger with DX Coil Unit system
linked with indoor air conditioners is used, set the Air to Air Heat
Exchanger with DX Coil Unit as "Follower", referring to "Setting
the address manually using the remote controller" in the
Installation Manual of the outdoor unit.
162
Installation Manual
Operation