Toshiba MD-VNK802HEXE Service Manual page 46

Changing the indoor address using the remote controller
Changing the indoor address using the wired remote controller
• Changing the indoor address in the individual operation (a pair of wired remote controller and indoor unit) or
group control
(Available when the address has already been set)
<Procedure> Perform while the unit is stopped.
1
Press and hold the
button for 4 seconds or longer.
(The first displayed UNIT No. is the header unit address
if in the group control.)
2
Press the
No. if in the group control.
(The fan of the selected indoor unit starts running.)
3
Use the button to set CODE No. to
4
Use the button to change the displayed
data.
5
Press the button.
6
Press the
No. to change next. Repeat
indoor unit address without duplicating it.
7
Press the
8
Press the button to finish.
button + button +
button to select an indoor unit
button to select an indoor unit
4 6
– to change the
button to confirm the change.
.
44
Procedure
End