Installation Of Indoor Unit; External Dimensions - Toshiba MD-VNK802HEXE Service Manual

5

Installation of Indoor Unit

WARNING
• Install the air conditioner at enough strong place to withstand the weight of the unit.
If the strength is not enough, the unit may fall down resulting in injury.
• To provide against strong wind or an earthquake, install the unit appropriately.
Inappropriate installation may result in the unit falling down and causing an accident.
NOTE
Strictly comply with the following rules to prevent damage of the indoor units
and human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit
unpacked by necessity, be sure to use buffering cloth, etc. to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or
resin parts, etc.).
Before you handle hanging brackets, put on thick gloves for protection.
• Supplied accessories are placed near the electrical control box. Do not dispose
of the accessories with the packaging. (See the figure on the right.)
• When a vibration-proof hanging bracket is attached to a hanging bolt, confirm that the unit does not vibrate more
through using the vibration-proof hanging bracket.
• Use a forklift to carry the unit. As it is packed in a cardboard box, do not drag or push it.
• Suction duct length must be longer than 850 mm.
• Helmet must be worn to protect your head from falling objects.
Especially, when you work under an inspection opening, helmet must be worn to protect your head from falling
objects from the opening.

External dimensions

EA
(Exhaust air)
OA
(Outdoor air)
A
J
Inspection cover
C
Electrical control cover
550
Maintenance cover
145
Installation Manual
Box for supplied
accessories
RA
(Return air)
SA
(Supply air)
G
E
E