Toshiba MD-VNK802HEXE Service Manual page 188

No. Component
14 Lid holder
15., 17.
15 Fixing lever
1., 18.
16 Damper motor holder
1., 2., 19., 20.
17 Louver motor
1., 2.,
19. to 22.
Procedure
17. Remove the two screws (M4×6) that fix the lid
holder, then remove the holder.
Two screws per location (there are two locations).
18. Widen the fixing lever to remove it from the gutter.
19. Release the small clamp and big clamp that fix the
connector 9, and then remove the connector.
20. Loosen the screw that fixes the damper motor
holder, and then slide ittoward you to remove it.
Note:
The screw hole of the damper motor holder is a hook
slot, and you can remove the damper motor holder
without removing the screw completely.
21. Remove the connector 9 from the louver motor.
22. Remove the two screws that fix the louver motor,
then remove it.
186
Note
Screws
(M4 × 6)
Connector 9
Clamp
Release
Hook slot
Screws
(M4 × 10)
Connector 9
Pan head screws
(M4 × 10)