Toshiba MD-VNK802HEXE Service Manual page 23

No. Item
4 Ventilation 2) Without remote controller, RBC-AMT32 remote controller compatible
mode switch • The ventilation mode can be switched depending on CODE (DN) [EA]
(Continued)
Ventilation mode
5 Ventilation 1) The ventilation fan speed is switched by the request from the remote controller.
fan speed
By remote controller
switch
Unbalance (*)
* Unbalance needs to be set in CODE (DN) [48].
Unbalanced fan
speed ventilation
2) Without remote controller, RBC-AMT32 remote controller compatible
• The ventilation fan speed can be changed depending on CODE (DN) [EB]
Ventilation fan speed
6 Room 1) Temperatures adjusted by remote controller (°C)
temperature
control
2) The HEAT temperature can be adjusted depending on CODE (DN) [06].
Temperature setting
Factory setting
Temperature setting
3) In addition to the above, the Air to Air Heat Exchanger with DX Coil Unit adjusts the
temperature of its own.
Temperature setting
Factory setting
Temperature setting
* Do not change the settings.
Specification outline
SET DATA 2
Heat
exchange
High Operate supply air / exhaust air in High
Low Operate supply air / exhaust air in Low
Operate supply air in High, exhaust air in Low
(Supply air > Exhaust air)
Operate supply air in Low, exhaust air in High
(Supply air < Exhaust air)
SET DATA 0
Invalid
SET DATA 2
High
Cool / Dry Heat
18 - 29 18 - 29
SET DATA 0
+0 °C
correction
SET DATA 2
+2 °C
correction
Cool / Dry
CODE No. [ C9 ]
SET DATA 0 - 7
-0 °C to -3.5 °C
correction (0.5 °C - interval)
Cool / Dry
SET DATA
-2.0 °C
correction
3
Automatic
Description
1 2
Valid Valid
(Supply air > (Supply air <
Exhaust air) Exhaust air)
3 4
Low Unbalance
2 4
+2 °C +4 °C
Heat
[ CA ]
0 - 7
+0 °C to +3.5 °C
(0.5 °C - interval)
Heat
4 5
+2.5 °C
21
Remarks
CODE No.
[48][EB]
CODE No.
[06][C9][CA]
Heat suction
temperature shift
6
(Except during remote
controller thermo)
+6 °C
Follow the normal indoor
unit setting.