X10SLA/X10SLA-F User's Manual
CPU Slot6 PCI-E 3.0 x16-ASPM
Use this feature to set the ASPM (Active State Power Management) level for the
device installed on the PCI-E slot specified above. The options are Disabled,
Auto, ASPM L0s, ASPM L1, and, ASPM L0sL1.
DMI Link ASPM Control
This feature configures the ASPM (Active State Power Management) settings for
the devices/components connected to the DMI Link on the System Agent side.
The options are Disabled, L0s, L1, and L0sL1.
PCH Link ASPM Control
Select Enabled to support ASPM (Active State Power Management) for both
North Bridge and South Bridge. The options are Disabled and Enabled.
PCH Slot7 PCI-E 2.0x2/4 (in x8) -ASPM
This feature configures the ASPM (Active State Power Management) settings
for the graphics devices installed on the slot indicated above. The options are
Disabled, L0s, L1, L0sL1 and Auto.
Memory Configuration
This submenu displays the information on the memory modules installed on the
motherboard.
•
Memory RC Version
•
Memory Frequency
•
Total Memory
•
Memory Voltage
•
DIMMA1
•
DIMMA2
•
DIMMB1
•
DIMMB2
•
CAS Latency (tCL)
•
Minimum Delay Time
•
CAS to RAS (tRODmin)
4-12