Table of Contents
Advertisement
7. Once the CPU is properly installed, use your thumb to gently push the load
plate handle down to the handle lock and lock it.
CPU properly
installed
8. When the CPU is securely locked into the CPU socket, the plastic cap will be
automatically loosened from the load plate. Use your thumb and index finger
to remove the plastic cap from the socket.
The plastic cap will
pop open when the
CPU is properly
socket. Remove the
cap from the socket.
Warning: You can install the CPU inside the socket only in one direction. Make sure
that it is properly inserted into the CPU socket before closing the load plate. If it
doesn't close properly, do not force it, as that may damage your CPU. Instead, open
the load plate again and check whether the CPU is properly aligned and securely
seated inside the socket.
installed in the
Load Plate Handle
is locked into place
2-7
Chapter 2: Installation
Advertisement
Table of Contents
