Hdd Led; Nic1/Nic2 Leds - Supermicro X10SLA User Manual

X10SLA/X10SLA-F User's Manual

HDD LED

The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
cable here to indicate HDD activ-
ity. See the table on the right for pin
definitions.

NIC1/NIC2 LEDs

The NIC (Network Interface Control-
ler) LED connection for GLAN Port 1
is located on pins 11 and 12 of JF1,
and the LED connection for GLAN
Port 2 is on Pins 9 and 10. Attach the
NIC LED cables to the LED indicators
mentioned above to display network
activity. Refer to the layout below for
the locations of NIC LED indicators.
X10SLA(-F)
Rev. 1.01
B
C
Blue+ (OH/Fan Fail/
PWR FaiL/UID LED)
2-24
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 3.3V SB/UID_SW
14 HD Active
GLAN1/2 LED
Pin Definitions (JF1)
Pin# Definition
9 NIC 2 Activity LED
10 NIC 2 Link LED
11 NIC 1 Activity LED
12 NIC 1 Link LED
A. HDD LED
B. NIC1 LED
C. NIC2 LED
20 19
Ground
X
FP PWRLED
A
HDD LED
NIC1 Link LED
NIC2 Link LED
Power Fail LED
Ground
Ground
2 1
NMI
X
3.3 V Stby
ID_UID_SW/3/3V Stby
NIC1 Activity LED
NIC2 Activity LED
Red+ (Blue LED Cathode)
3.3V
Reset
Reset Button
Power Button
PWR