Removing Memory Modules; Memory Support; Memory Population Guidelines - Supermicro X10SLA User Manual

X10SLA/X10SLA-F User's Manual

Removing Memory Modules

Reverse the steps above to remove the DIMM modules from the motherboard.

Memory Support

Channel A, Slot 1
Channel A, Slot 2
(Blue Slot)
Channel B, Slot 1
Channel B, Slot 2
(Blue Slot)
The X10SLA(-F) supports up to 32GB of Unbuffered (UDIMM) DDR3 ECC
1600/1333 MHz in 4 memory slots. Populating these DIMM modules with a pair
of memory modules of the same type and same size will result in interleaved
memory, which will improve memory performance. Please refer to the table below:

Memory Population Guidelines

Please follow the table below when populating the X10SLA(-F).
DDR3 Unbuffered ECC (UDIMM) Memory
DIMM Slots per DIMMs Populat-
Channel ed per Channel
2
2
Notes:
•
Be sure to use memory modules of the same type, same speed, same
frequency on the same motherboard. Mixing of memory modules of dif-
ferent types and speeds is not allowed.
•
Due to memory allocation to system devices, the amount of memory that
remains available for operational use will be reduced when 4 GB of RAM
is used. The reduction in memory availability is disproportional. See the
following table for details.
Towards the CPU
Towards the edge of the motherboard
DIMM Type
1 Unbuffered
DDR3
2 Unbuffered
DDR3
2-14
POR Speeds Ranks per DIMM (any
combination)
1333, 1600 Single Rank, Dual Rank
1333, 1600 Single Rank, Dual Rank