Front Control Panel - Supermicro X10SLA User Manual

X10SLA/X10SLA-F User's Manual

Front Control Panel

JF1 contains header pins for various buttons and indicators that are normally located
on a control panel at the front of the chassis. These connectors are designed spe-
cifically for use with Supermicro chassis. See the figure below for the descriptions
of the front control panel buttons and LED indicators. Refer to the following section
for descriptions and pin definitions.
Blue+ (OH/Fan Fail/
PWR FaiL/UID LED)
X10SLA(-F)
Rev. 1.01
JF1 Header Pins
Ground
X
FP PWRLED
HDD LED
NIC1 Link LED
NIC2 Link LED
Power Fail LED
Ground
Ground
2-22
20 19
NMI
X
3.3 V Stby
ID_UID_SW/3/3V Stby
NIC1 Activity LED
NIC2 Activity LED
Red+ (Blue LED Cathode)
3.3V
Reset
Reset Button
Power Button
PWR
2 1