X10SRL-F User's Manual
Removing Memory Modules
Reverse the steps above to remove the DIMM modules from the motherboard.
Memory Support
DIMMB2
DIMMB1
DIMMA2
DIMMA1
The X10SRL-F supports eight ECC DDR4 RDIMM/LRDIMM at 2400 MHz (max.)
memory (1 DPC) up to 256GB RDIMM or 512GB LRDIMM. Populating these DIMM
modules with a pair of memory modules of the same type and size will result in
interleaved memory, which will improve memory performance. Please refer to the
table on the next page:
Memory Population Guidelines
When installing memory modules, the DIMM slots must be populated in the fol-
lowing order: DIMMA1, DIMMB1, DIMMC1, and DIMMD1. The blue slots must be
populated first. Then populate DIMMA2, DIMMB2, DIMMC2, and DIMMD2. Please
refer to the tables on the next page.
2-14
DIMMD2
DIMMD1
DIMMC2
DIMMC1