Recording To An Memory Card Manually - Canon VB-H43 Operation Manual

Recording to an Memory Card Manually

Video displayed in the Admin Viewer can be manually
recorded to an memory card.
Note
• To record on an memory card, an memory card must be
inserted in the camera (p. 140) and [Save Logs and Videos]
must be selected in the setting page > [Memory Card] >
[Operation Settings].
• The format and size of the video recorded on an memory card
depends on the settings made on the Setting page.
Video format: [Memory Card] > [Video Format]
Video size: JPEG [Video] > [JPEG] > [Video Size: Upload /
Memory card]
H.264 [Video] > [H.264(1)] > [Video Size]
Recording Videos Manually
If you have not yet obtained the camera control
1
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.
Click the [Start/Stop Memory Card Recording] button.
2
The [Start/Stop Memory Card Recording] button
appearance changes as shown below depending on
recording status.
Not recording
Recording
3 To stop video recording, click the [Start/Stop Memory
Card Recording] button again.
Important
• Recording to the memory card will be terminated when the
length of manually recorded video exceeds 300 seconds
from the time recording started.
• When recording manually, do not change the settings in the
[Setting Page]. Doing so may result in the termination of the
manual recording.
Performing Operations and Settings in the Admin Viewer
Confirming Manually Recorded Video
Use the Recorded Video Utility (p. 128) to confirm video
manually recorded to an memory card.
Click the [Recorded Video Utility] button to start the
Recorded Video Utility from the Admin Viewer.
6
159