Canon VB-H43 Operation Manual page 179

Warning Messages
Message
Could not connect to the camera.
The camera is busy.
Failed to get camera control privileges.
Failed to establish audio connection.
You are not connected to the camera.
Please get camera control privileges.
Another user is already connected as an administrator.
The viewer is already connected in another window.
No audio device.
Failed to initialize Canon Network Camera Audio
Receiver.
Insufficient memory card capacity.
Recording to memory card is not allowed.
Message
You cannot control the camera unless you exit Viewer
PTZ.
Connection failed due to an invalid IP address, etc.
The connection limit was exceeded.
The request for camera control privileges was denied because the camera
was being used by the Admin Viewer, etc.
Connection for audio reception failed.
An attempt was made to operate the camera when the camera was not
connected.
An attempt was made to operate the camera without camera control privileges.
The Admin Viewer is already connected to the camera.
The viewer is already available in another window.
The [Audio] button has been clicked when there is no audio device or the
audio device has been disabled in the PC.
ActiveX plugin is not installed within ten seconds after clicking the [Audio]
button.
An attempt was made to recording to a memory card with insufficient
capacity.
Recording to the memory card failed because [Memory Card Operation
Status] > [Operation Settings] was not set to [Save Logs and Videos].
The video was clicked with the Viewer PTZ in the ON state while you have
control privileges.
List of Viewer Messages
Explanation
Explanation
7
179